Skip to content
Open calculators

Mixed-Size Part Yield by Dedicated Stock Pool

Estimate mixed rectangular part output when each part size has its own assigned stock pool.

Prefilled values are examples. Replace them with measurements and current costs for your project.

Inputs

Mixed parts and dedicated stock pools

Part sizes and dedicated stock pools

Cutting setup

Range: at least 0 in

Kerf is included between adjacent parts on both grid axes; no perimeter cut allowance is added.

Result

Total parts available from assigned pools
—
Area excluded for defect bands
—
Required parts covered
—
Available parts with part width along stock width
—
Available parts with part length along stock width
—
Usable-area packing efficiency
—
Total parts required
—
Parts short
—
Surplus parts in assigned pools
—
Total raw stock area
—
Usable area in assigned pools
—
Part area as share of raw stock
—
—
—
—
—

Related calculators

Results are planning aids based on the inputs and assumptions shown. Verify dimensions, stock sizes, hardware clearances, kerf, and current prices against your project before cutting or quoting.