Saw Kerf and Cut Length Calculator
Estimate repeated same-length cuts, kerf, end trim, stock-piece capacity, and stock quantity.
Prefilled values are examples. Replace them with measurements and current costs for your project.
Result
Total end-trim allowance
1.000 in
Total kerf allowance
0.500 in
Whole parts per stock piece
5.00
Total stock length to purchase
96.000 in
Remaining length
4.500 in
Length needed if cut from one stock piece
91.500 in
Stock pieces to purchase
1.00
Fits in stock
Whole part count
Stock count assumes identical-length parts and the entered kerf and end trim.
Formula
Length needed if cut from one stock piece
—
Remaining length
—
Related calculators
Cabinet Case Parts Cut List Calculator
Calculate rectangular side, top/bottom, and back panel dimensions from outside case dimensions.
Open calculatorEnd-Grain Cutting Board Grid Estimator
Estimate equal-size end-grain blocks, compare two grid orientations, and calculate rectangular stock footprint including the entered kerf between blocks.
Open calculatorEnd-Grain Cutting Board Stock Takeoff
Estimate rip strips, crosscut slices, panel cut length, rough stock blanks, and board feet for a repeated end-grain layout.
Open calculatorFace Frame Parts Cut List Calculator
Calculate stile and rail cut dimensions for a rectangular face frame.
Open calculator