Skip to content
Open calculators

Wood Drying Target Weight Calculator

Estimate the sample weight that corresponds to a selected target moisture content.

Prefilled values are examples. Replace them with measurements and current costs for your project.

Inputs

Current condition and target

Range: at least 0

Enter the sample's current weight. Use the same weight unit for all results.

Range: at least 0 dry basis, %

Enter a measured dry-basis moisture content. Values above 100% are accepted.

Range: at least 0 dry basis, %

Result

Estimated oven-dry weight (same unit)
—
Weight at target moisture content (same unit)
—
Weight to remove; negative means weight to add (same unit)
—
—

Formula

Estimated oven-dry weight (same unit)
—
Weight at target moisture content (same unit)
—
Weight to remove; negative means weight to add (same unit)
—

Related calculators

Results are planning aids based on the inputs and assumptions shown. Verify dimensions, stock sizes, hardware clearances, kerf, and current prices against your project before cutting or quoting.